Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
Sch_Dlg-BreakUnionFormConfirm Break Objects Union (SCH) _AD
Created: 七月 28, 2015 | Updated: 六月 16, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
您正在阅读的是 16.0. 版本。关于最新版本，请前往 Sch_Dlg-BreakUnionForm((Confirm Break Objects Union (SCH) ))_AD 阅读 22 版本
The Confirm Break Objects Union dialog.
Summary
The Confirm Break Object Union dialog allows designers to remove objects from, or keep objects in, a Union.
Access
This dialog can be accessed in the following ways:
- Right-click on any object which has been added to a Union and select Unions » Break Objects from Union from the context menu.
- From the main menu, select Tools » Convert » Break objects from Union and then click on the object to be removed from a Union.
Options/Controls
Choose Objects to Keep or Remove from Union
- Object Kind - Shows the object type, e.g., Net Label, Bus, Hyperlink, etc.
- Description - Shows the description of the objects, e.g., height/width, designator, etc.
- Keep in Union - Click the checkbox in this column to mark an object(s) for removal from the Union.
- All On - Click to mark all objects for removal from the Union.
- All Off - Click to deselect all objects.
Click OK to save changes and remove selected objects or click Cancel to exit the dialog without making any changes to the Union.
