Altium Designer Documentation

Rounding Coordinates of Objects

Created: February 23, 2018 | Updated: February 23, 2018
您正在阅读的是18.0版本。 关于最新版本,请前往阅读22版本
All Contents

The Rounding coordinates of objects dialog
The Rounding coordinates of objects dialog


The Rounding coordinates of objects dialog is used to define to which documents the rounding process will be applied.


The dialog is accessed from the schematic editor by clicking Tools » Convert » Round coordinates of objects from the main menus.


Choose Document Scope

  • Just this document - round coordinates only for the current document.
  • All schematic documents in the current project - round coordinates for all schematic documents of the current project. Schematic documents of the current project that are currently closed will be opened.
  • All open schematic documents - round coordinates for all the schematic documents that are currently opened regardless of the project to which they belong.
After you make your selection and click OK, an information dialog will open that summarizes how many objects on how many documents had their coordinates rounded.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.



We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: