Working with a Round Rectangle Object on a Schematic Sheet in Altium Designer

您正在阅读的是 17.1. 版本。关于最新版本,请前往 Working with a Round Rectangle Object on a Schematic Sheet in Altium Designer 阅读 21 版本
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0 and 17.1
 

Parent page: Schematic Objects

 A placed Round Rectangle.

A placed Round Rectangle.

Summary

A round rectangle is a non-electrical drawing primitive. Essentially a rectangle object with rounded corners, it is a graphic element that can be placed on a schematic sheet – filled or unfilled.

Availability

Round rectangles are available for placement in both Schematic and Schematic Library Editors:

  • Schematic Editor - the following commands are available:
    • Choose Place » Drawing Tools » Round Rectangle from the main menus.
    • Click the  button on the Utility Tools drop-down () of the Utilities toolbar.
  • Schematic Library Editor - the following commands are available:
    • Choose Place » Round Rectangle from the main menus.
    • Click the  button on the Utility Tools drop-down () of the Utilities toolbar.

Placement

After launching the command, the cursor will change to a cross-hair and you will enter round rectangle placement mode. Placement is made by performing the following sequence of actions:

  1. Click or press Enter to anchor the first corner of the round rectangle.
  2. Move the cursor to adjust the size of the round rectangle and click or press Enter to complete placement.
  3. Continue placing further round rectangles, or right-click or press Esc to exit placement mode.

Additional actions that can be performed during placement – while the round rectangle is still floating on the cursor, and before its first corner is anchored – are:

  • Press the Tab key to access an associated properties dialog, from where properties for the round rectangle can be changed on-the-fly.
  • Press the Alt key to constrain the direction of movement to the horizontal or vertical axis, depending on the initial direction of movement.
  • Press the Spacebar to rotate the round rectangle anti-clockwise or Shift+Spacebar for clockwise rotation. Rotation is in steps of 90°.
  • Press the X or Y keys to mirror the round rectangle along the X-axis or Y-axis respectively.

While attributes can be modified during placement (Tab to bring up associated properties dialog), bear in mind that these will become the default settings for further placement unless the Permanent option on the Schematic – Default Primitives page of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.

Graphical Editing

This method of editing allows you to select a placed round rectangle object directly in the workspace and change its size, shape or location, graphically.

When a rounded rectangle object is selected, the following editing handles are available:

 A selected Round Rectangle.

A selected Round Rectangle.

  • Click and drag A to resize the round rectangle in the vertical and horizontal directions simultaneously.
  • Click and drag B to resize the round rectangle in the vertical and horizontal directions separately.
  • Click and drag C to change the curvature of the corners. This affects all corners equally, regardless of which editing handle is chosen.
  • Click anywhere on the round rectangle – away from editing handles – and drag to reposition it. While dragging, the round rectangle can be rotated (Spacebar/Shift+Spacebar) or mirrored (X or Y keys to mirror along the X-axis or Y-axis respectively).

If attempting to graphically modify an object that has its Locked property enabled, a dialog will appear asking for confirmation to proceed with the edit. If the Protect Locked Objects option is enabled on the Schematic – Graphical Editing page of the Preferences dialog, and the Locked option for that design object is enabled as well, then that object cannot be selected or graphically edited. Double click on the locked object directly and disable the Locked property or disable the Protect Locked Objects option, to graphically edit the object.

Non-Graphical Editing

The following methods of non-graphical editing are available:

Via an Associated Properties Dialog

Dialog page: Round Rectangle

This method of editing uses the Round Rectangle dialog to modify the properties of a round rectangle object.

 The Round Rectangle dialog.

The Round Rectangle dialog.

The Round Rectangle dialog can be accessed prior to entering placement mode, from the Schematic – Default Primitives page of the Preferences dialog. This allows the default properties for the round rectangle object to be changed, which will be applied when placing subsequent round rectangles.

During placement, the dialog can be accessed by pressing the Tab key.

After placement, the dialog can be accessed in one of the following ways:

  • Double-clicking on the placed round rectangle object.
  • Placing the cursor over the round rectangle object, right-clicking and choosing Properties from the context menu.
  • Using the Edit » Change command and clicking once over the placed round rectangle object.

Via an Inspector Panel

Panel pages: SCH Inspector, SCHLIB Inspector, SCH Filter, SCHLIB Filter

An Inspector panel enables the designer to interrogate and edit the properties of one or more design objects in the active document. Used in conjunction with appropriate filtering - by using the applicable Filter panel, or the Find Similar Objects dialog - the panel can be used to make changes to multiple objects of the same kind, from one convenient location.

Via a List Panel

Panel pages: SCH List, SCHLIB List, SCH Filter, SCHLIB Filter

List panel allows the designer to display design objects from one or more documents in tabular format, enabling quick inspection and modification of object attributes. Used in conjunction with appropriate filtering - by using the applicable Filter panel, or the Find Similar Objects dialog - it enables the display of just those objects falling under the scope of the active filter – allowing the designer to target and edit multiple design objects with greater accuracy and efficiency.

 

可用的功能取决于您的 Altium Designer 软件订阅级别

Content