Altium Designer Documentation

Line Numbering

Created: May 30, 2019 | Updated: December 11, 2020
All Contents

LineNumberingdlg_SetLineNumbers_AD19   LineNumberingdlg_ContinueNumbering

                                                                     LineNumbering dlg_RenumberAll

Three variations of the Line numbering dialog

Summary

The Line numbering dialog is used to select the action required when numbering the Line# column in an ActiveBOM document (*BomDoc).

Refer to the Line # Options dialog is used to configure the numbering start value and increment.

Access

The dialog is accessed from an ActiveBOM document (*BomDoc) by clicking the ActiveBON Line numbering button button. 

Options/Controls

Set Line Numbers Variation

LineNumbering dlg_Set Line Numbers

This variation of the dialog opens when ALL Line# cells in an ActiveBOM document (*BomDoc) are empty.
  • Set Line numbers for selected rows - click to use the existing numbers as references and continuously number the SELECTED empty cells, starting with the nearest non-empty cells above.
  • Set Line numbers for all rows - click to use the existing numbers as references and continuously number ALL empty cells, starting with the nearest non-empty cells above.

Continue Numbering Variation

LineNumbering Dlg_ ContinueNumbering

This variation of the dialog opens when SOME of the line numbers in an ActiveBOM document (*BomDoc) have already been defined.
  • Continue numbering - click to use the existing numbers as references and continuously number empty cells starting from the nearest non-empty cells above.

  • Renumber all - click to delete all existing numbers and renumber all rows.

Renumber All Variation

LineNumbering dialog_ Renumber All

This variation of the dialog opens when ALL of the line numbers in an ActiveBOM document (*BomDoc) have already been defined.
  • Renumber all - click to delete all existing numbers and renumber all rows.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: