Parameter Variation
Created: September 16, 2022 | Updated: September 16, 2022
| Applies to version: 22
This document is no longer available beyond version 22. Information can now be found here: Graphical Parameter Editing for version 24
Summary
This dialog allows you to view, edit or disable a varied parameter used for a component variant.
Access
The Parameter Variation dialog is accessed by performing the following steps:
- In a project that includes at least one variant, switch the schematic editor to the compiled view tab located at the bottom left-hand side of the design space.
- Double-click on a component's visible, varied parameter (for example, its Comment).
Options/Controls
- Name – this is a non-editable field that is populated by the logical, as opposed to physical, component parameter information (the name of the parameter).
- Visible – when this option is enabled, the parameter is displayed (non-editable; set in the base design).
- Lock – when this option is enabled, the parameter cannot be reassigned (non-editable; set in the base design).
- Value – this is a non-editable field that is populated with the logical component parameter data (the value of the parameter).
- Visible – when this option is enabled, the value is displayed (non-editable; set in the base design).
- Lock – when this option is enabled, the value cannot be reassigned (non-editable; set in the base design).
- Variation (will be saved in <projectname>)
- Varied Value – uncheck this option to disable the parameter variation. When checked, the varied value is active and can be edited in the associated textbox.