Altium NEXUS Documentation

CopyComponent

Created: June 17, 2022 | Updated: June 17, 2022

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to place a copy of a footprint from the current PCB Library document onto the clipboard.

Access

This command is accessed from the PCB Library Editor by choosing the Edit » Copy Component command from the main menus.

Use

First, ensure that the footprint you want to copy to the clipboard is selected in the Footprints list of the PCB Library panel (and is therefore the active footprint in the main design window).

After launching the command, the footprint will be copied to the clipboard.

Tips

  1. Once copied, the footprint can be pasted into any PCB Library document using the Paste Component command, also available from the main Edit menu.
  2. One or more library footprints can also be copied to/pasted from the clipboard directly in the PCB Library panel. To copy, simply select the required footprint(s) in the Footprints list, right-click then choose the Copy command from the context menu. To paste, right-click then choose the Paste command from the context menu.
  3. The clipboard can store a number of objects that can be added (pasted) to various document types within Altium NEXUS. The clipboard supports a variety of data formats, depending on the origin and object type, and can be set to store either only objects copied or cut from within the Altium NEXUS environment or the entire Windows clipboard - using the Monitor clipboard content within this application only option on the System - General page of the Preferences dialog. Be aware that not all data types are supported by each design editor and that objects that are not supported will not be pasted.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: