Altium NEXUS Documentation


Created: July 27, 2015 | Updated: January 4, 2020
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to chamfer selected 90 degree routing corners. Chamfering (also called mitering) is a technique used to reduce reflections caused by the corner in a microwave frequency route by effectively slicing off the outer point of the corner. Because Altium's track objects have rounded ends, they cannot be used to create a chamfered corner. To create the chamfered corner, the selected track segments are replaced with region objects.


This command is accessed from the PCB Editor by choosing the Tools » Convert » Convert Selected Tracks to Chamfered Path command from the main menus.


First ensure that the track segments involved in the 90 degree routing corners you want to chamfer are selected in the workspace.

After launching the command, the Convert Tracks to Chamfered Path dialog will open. Use this dialog to configure the chamfer then click OK. Each selected track segment pair (with offending 90 degree angles) will be replaced with chamfered cornering and the original track segments in each pairing will be converted to a single solid (copper) region object.


  1. To undo this command, use the Ctrl+Z keyboard shortcut.


Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: