Altium NEXUS Documentation

PCB_Cmd-CreateComponentCreateComponent_AD

Created: June 17, 2022 | Updated: June 17, 2022
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to add a new footprint to the current PCB Library document.

Access

This command can be accessed from the PCB Library Editor by:

  • Choosing the Tools » New Blank Footprint command from the main menus.
  • Right-clicking in the workspace then choosing the Tools » New Blank Footprint command from the context menu.
  • Right-clicking in the Footprints region of the PCB Library panel then choosing New Blank Footprint from the context menu.

Use

After launching the command, a new footprint will be added to the active PCB Library document, and made the active component in the main design window. You can then proceed to place design primitives to create the 2D footprint and also add 3D body information as required to define the 2D/3D model that fully represents the footprint in the PCB domain.

Tips

  1. To create a new footprint within the current PCB Library document in a semi-automated way, use the PCB Component Wizard.
  2. If your components are required to be IPC-compliant, you can use the IPC Compliant Footprint Wizard or the IPC Compliant Footprints Batch Generator commands.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: