Altium NEXUS Documentation

MoveBoard

Created: February 29, 2016 | Updated: April 30, 2020

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: Object=Board

Summary

This command is used to move the entire board - the board shape, plus all design objects within that shape - to another position in the current document.

Access

This command can be accessed from the PCB Editor when configured in Board Planning Mode by choosing the Design » Move Board command from the main menus.

The current viewing mode for the PCB document can be changed using the corresponding commands from the main View menu. To switch to Board Planning Mode, use the command of the same name or use the 1 keyboard shortcut.

Use

After launching the command, an outline copy of the board shape will be attached to the cursor, held by its bottom-left corner. Move the shape to the desired new location within the workspace then click or press Enter to effect placement. All constituent design objects will be moved also to maintain position within the board shape.

To cancel without moving, right-click or press Esc.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: