Altium NEXUS Documentation

PCB_Cmd-ManageLayerSetsManageLayerSets_AD

Created: June 9, 2022 | Updated: June 9, 2022
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: SetIndex=n (where n is in the range 0 to 20)

Summary

This command is used to switch to the indicated layer set.

Access

The related indexed commands are available from the PCB Editor from the Design » Manage Layer Sets sub-menu.

In addition, from both PCB and PCB Library Editors, the indexed commands are available from the context menu associated with the Layer Set control - accessed by clicking the LS part of the button to the left of the layer tabs at the bottom of the main design window.

Use

After launching the command, the indicated layer set is made the current layer set with only its member layers presented visibly in the design space.

Tip

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: