IPC2581_Dlg-ConfigurationFormIPC-2581 Configuration_AD

現在、バージョン 20.1. をご覧頂いています。最新情報については、バージョン IPC2581_Dlg-ConfigurationForm((IPC-2581 Configuration))_AD の 22 をご覧ください。
Applies to Altium Designer versions: 19.1, 20.0, 20.1 and 20.2

The IPC-2581 Configuration dialog
The IPC-2581 Configuration dialog

Summary

The IPC-2581 Configuration dialog is used to configure IPC-2581 exports. Related to the existing ODB++ format, IPC-2581 is an open-source standard developed by the Institute for Printed Circuits IPC-2581 Consortium in 2004, but since refined to the most recent Revision A and B releases (IPC-2581A/B).

For a high-level look at this fabrication format, see IPC-2581 Support.

Access

The dialog is accessed by:

  • In the PCB editor, clicking File » Fabrication Outputs » IPC-2581.
  • In an OutputJob file, add an IPC-2581 job by clicking the [Add New Fabrication Output] job group under the Fabrication Outputs region, then select IPC-2581 » [PCB Document] or other desired document listed.

Options/Controls

  • IPC2581 version - use the drop-down to select the correct version of IPC-2581.
  • Measurement System - use the drop-down to select either Metric or Imperial units.
  • Floating Point Precision - type in the desired number or use the arrow keys to select the desired floating point.
  • Merge Net-Tie Nets - when enabled, if a design contains nets connected by Net-Tie components, these nets will report as distinguished single nets in the netlist.

 

注記

利用できる機能は、Altium Designer ソフトウェア サブスクリプション のレベルによって異なります。