Sch_Dlg-ChooseDocumentStructureViewChoose Destination Document_AD

Вы просматриваете версию 17.0. Для самой новой информации, перейдите на страницу Sch_Dlg-ChooseDocumentStructureView((Choose Destination Document))_AD для версии 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0 and 17.1

The Choose Destination Document dialog.

The Choose Destination Document dialog.

Summary

This dialog allows the designer to specify the target schematic document on which to move the currently selected design objects, when using the refactoring feature. Refactoring allows circuitry to be moved around between the project's source schematics, and is particularly useful where a sheet is becoming overloaded, or the circuitry is better contained as a sub-sheet that is referenced by a sheet symbol on a sheet above it in the hierarchy.

Access

In the Schematic Editor, first ensure the design objects constituting the circuitry to be moved, are selected in the workspace. Then either:

  • Use the Edit » Refactor » Move Selected Subcircuit to Different Sheet command, from the main menus, or
  • Right-click, and use the Refactor » Move Selected Subcircuit to Different Sheet command from the context menu.

Options/Controls

The main area of the dialog lists all candidate schematic documents for the project, that can validly be used as the target sheet for the move.

Simply click on an entry to select the required document.

The active schematic document, on which the selected circuitry currently resides, is greyed-out. As it is the source document, it cannot also be a valid target document for the move, and is therefore unavailable.
If the selected sub-circuitry is to reside on a fresh schematic sheet – a blank canvas as it were – ensure that the schematic is first created and saved, so that it will appear in the dialog.

 

Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.