WorkspaceManager_Dlg-EditString_FormDCode_AD

Created: 十月 07, 2021 | Updated: 十月 08, 2021 | Applies to version: 21

This document is no longer available beyond version 21. Information can now be found here: Generating Gerber Fabrication Data for version 24

The DCode dialog The DCode dialog

Summary

The DCode dialog allows you to specify a DCode string for an aperture.

This dialog is accessed by clicking New on the Apertures tab of the Gerber Setup dialog.

The Embedded Apertures (RS274X) option on the Apertures tab must be disabled to access the New option.

Enter a number from 10 to 999 for the aperture DCode string.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.