PCB_Cmd-ShowLayerAndColorPanelShowLayerAndColorPanel_AD

Created: September 25, 2017 | Updated: July 18, 2018

Now reading version 2.1. For the latest, read: ShowLayerAndColorPanel for version 5

Applies to altium-nexus versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2 and 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:

Access View Configuration Panel (Layers & Colors tab)

Applied Parameters: FocusTo = LayersAndColors

Summary

This command is used to quickly access the Layers & Colors tab of the View Configuration panel.

Access

This command is accessed from the PCB Editor and the PCB Library Editor by using the L keyboard shortcut.

Use

After launching the command, the View Configuration panel will be opened (or given focus if already visible) and its Layers & Colors tab made the active tab.

Access View Configuration Panel (View Options tab)

Applied Parameters: FocusTo = ViewOptions

Summary

This command is used to quickly access the View Options tab of the View Configuration panel.

Access

This command is accessed from the PCB Editor and the PCB Library Editor by using the Ctrl+D keyboard shortcut.

Use

After launching the command, the View Configuration panel will be opened (or given focus if already visible) and its View Options tab made the active tab.

Printer-friendly version

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

PCB_Cmd-ShowLayerAndColorPanelShowLayerAndColorPanel_AD

Summary

Access

Use

Summary

Access

Use

Contact Us