Altium NEXUS Documentation

ShowApplicableRules

Modified by Susan Riege on Feb 6, 2019

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: None

Summary

This command is used to determine and display which unary design rules apply to an object that you select in the current document. Unary rules apply to one object, or each object in a set of objects. As a consequence, unary design rules have one rule scope.

Access

This command can be accessed from the PCB Editor by right-clicking over a placed design object in the design workspace (or in free space, over the board shape) and choosing the Applicable Unary Rules command from the context menu.

Use

Use of the command depends on how it is accessed:

  • Over a placed object - after launching the command, the Applicable Unary Rules dialog will open, displaying all unary design rules that apply to that object.
  • In free space over the board shape - after launching the command, you will be prompted to select an object in the design. Position the cursor over the required object then click or press Enter. The Applicable Rules dialog will open, displaying all unary design rules that apply to the chosen object.

Tips

  1. All defined unary design rules that could be applied to the selected object are analyzed and listed in the dialog.
  2. Each rule listed in the dialog will have either a check () or a cross () next to it. A check indicates the rule with the highest priority out of all applicable rules of the same type – this is the rule currently applied. Lower priority rules of the same type are listed with a cross next to them, indicating that they are applicable but, since they are not the highest priority rule, they are not currently applied. Any rules that would apply to the object but are currently disabled would also have a cross next to them and would appear using strikethrough highlighting.
  3. If, rather than seeing which rules apply to an object, you would prefer to pick a rule and see for which objects that rule applies, this can be achieved from the PCB Rules And Violations panel. As you click on a specific rule in the Rules region of the panel, filtering will be applied using the rule as the scope of the filter. Only those design objects that fall under the scope of the rule will be filtered. By employing the mask highlighting feature, you can quickly see the resulting objects targeted by the rule.


Applied Parameters: Binary=True

Summary

This command is used to determine and display which binary design rules apply between two objects that you select in the current document. Binary rules apply between two objects, or between any object in one set to any object in a second set. As a consequence, binary design rules have two rule scopes.

Access

This command can be accessed from the PCB Editor by:

  • Selecting two design objects, right-clicking then choosing the Applicable Binary Rules command from the context menu.
  • Right-clicking anywhere in the design workspace (with no objects selected) and choosing the Applicable Binary Rules command from the context menu.

Use

Use of the command depends on how it is accessed:

  • Two objects selected already - after launching the command, if the two selected objects have at least one binary rule applied between them, the Applicable Binary Rules dialog will open displaying all binary design rules that apply between those objects.
  • No objects selected - after launching the command, you will be prompted to select two objects in the design. Position the cursor over each object in turn then click or press Enter. If the two selected objects have at least one binary rule applied between them, the Applicable Rules dialog will open displaying all binary design rules that apply between the objects.

Tips

  1. All defined binary design rules that could be applied to the selected objects are analyzed and listed in the dialog.
  2. Each rule listed in the dialog will have either a check () or a cross () next to it. A check indicates the rule with the highest priority out of all applicable rules of the same type – this is the rule currently applied. Lower priority rules of the same type are listed with a cross next to them, indicating that they are applicable but, since they are not the highest priority rule, they are not currently applied. Any rules that would apply to the object but are currently disabled would also have a cross next to them and would appear using strikethrough highlighting.
  3. If, rather than seeing which rules apply between two objects, you would prefer to pick a rule and see for which objects that rule applies, this can be achieved from the PCB Rules And Violations panel. As you click on a specific rule in the Rules region of the panel, filtering will be applied using the rule as the scope of the filter. Only those design objects that fall under the scope of the rule will be filtered. By employing the mask highlighting feature, you can quickly see the resulting objects targeted by the rule.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

You are reporting an issue with the following selected text
and/or image within the active document:
ALTIUM DESIGNER FREE TRIAL
Altium Designer Free Trial
Let’s get started. First off, are you or your organization already using Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

In that case, why do you need an evaluation license?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You actually don’t need an evaluation license for that.

Click the button below to download the latest Altium Designer installer.

Download Altium Designer Installer

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Please fill out the form below to get a quote for a new seat of Altium Designer.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

If you are on Altium Subscription, you don’t need an evaluation license.

If you are not an active Altium Subscription member, please fill out the form below to get your free trial.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Why are you looking to evaluate Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

You came to the right place! Please fill out the form below to get your free trial started.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

That’s great! Making things is awesome. We have the perfect program for you.

Upverter is a free community-driven platform designed specifically to meet the needs of makers like you.

Click here to give it a try!

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.