Altium NEXUS Documentation

SwitchPolygonEditMode

Modified by Susan Riege on Jan 25, 2019

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: ContextObject=Polygon|EditMode=Size

Summary

This command is used to switch from editing the shape to editing the size of the selected polygon pour object currently under the cursor.

Access

This command is accessed from the PCB Editor by right-clicking over a selected polygon pour object then choosing the Polygon Actions » Resize Polygon command from the context menu.

Use

First, ensure that the polygon pour whose size you want to modify is selected in the main design workspace and that the cursor is positioned over it.

After launching the command, the polygon editing mode will change from that of reshaping, to that of resizing. Confirmation of this is visually conferred by the editing handles along each edge of the polygonal shape, being replaced with eight editing handles located at the corners (and centers) of the object's bounding rectangle.

  • Click and drag a corner editing handle to resize the polygonal pour in the vertical and horizontal directions simultaneously.
  • Click and drag a center editing handle to resize the polygonal pour in the vertical or horizontal direction separately.
As you resize the polygon pour, the outline of its former shape remains, until the modified polygon is repoured, as an indication of the change.
  • Click on the actual shape of the polygon, and drag to move it.

Additional actions that can be performed during movement are:

  • Press the Spacebar to rotate the polygon counterclockwise, or Shift+Spacebar for clockwise rotation. Rotation is in accordance with the value for the Rotation Step defined on the PCB Editor – General page of the Preferences dialog.
  • Press the L key to flip the polygon to the other side of the board.
  • Press the X or Y keys to mirror the polygon along the X-axis or Y-axis respectively.

After modifying the size or location of the polygon pour, it will become marked as modified. If the Repour Polygons After Modification option is enabled on the PCB Editor - General page of the Preferences dialog, the polygon (and all of its dependants) will be repoured automatically. If this option is not enabled, the polygon pour will not be repoured.

Tips

  1. A modified polygon pour is one that has been changed in some way, but has not yet been repoured. Its IsModified property - which can be seen from the PCB List panel for a selected polygon pour - is enabled (True).


Applied Parameters: ContextObject=Polygon|EditMode=Shape

Summary

This command is used to switch from editing the size, to editing the shape, of the selected polygon pour object currently under the cursor.

Access

This command is accessed from the PCB Editor by right-clicking over a selected polygon pour object, whose size is currently being modified, and choosing the Polygon Actions » Edit Polygon Shape command from the context menu.

Use

First, ensure that the polygon pour whose shape you wish to modify, is selected in the main design workspace, is currently in size-editing mode, and that the cursor is positioned over it.

After launching the command, the polygon editing mode will change from that of resizing, to that of reshaping. Confirmation of this is visually conferred by the eight editing handles located at the corners (and centers) of the object's bounding rectangle, being replaced with editing handles along each edge of the polygonal shape.

The outer shape of the polygon object is defined by a series of edges: where each edge is represented by an end vertex, shown as a solid white square; and a center vertex, shown as a hollow white square. Each end vertex represents the location where 2 edges meet.

  • Click and drag an end vertex to perform one of the following, depending on the current mode (use Shift+Spacebar to change modes):
    • Moving Vertex mode - freely move the end vertex, maintaining it as an end vertex.
    • Miter to Segment mode - creates a new straight edge, with the moving end vertex becoming the center vertex for that edge.
    • Miter to Arc mode - creates a new curved edge, with the moving end vertex becoming the center vertex for that edge.
  • Click and drag a center vertex to perform one of the following, depending on the current mode (use Shift+Spacebar to change modes):
    • Move mode - freely move the entire edge, including its end vertices. The moved center vertex remains the center vertex for that edge.
    • Break mode - move the center vertex, turning it into a new end vertex, and splitting the original edge into two. The end vertices remain fixed at their original locations.
    • Incurvate mode - add curvature to the edge, with the end vertices fixed at their original locations. The moved center vertex remains the center vertex for that edge.
  • Click anywhere along an edge, away from editing handles, and drag to slide that edge - shrinking or growing the moving edge to maintain the position of adjoining edges.
  • Ctrl+click anywhere along an edge, away from editing handles, to insert a new end vertex.
As you reshape the polygon pour, the outline of its former shape remains, until the modified polygon is repoured, as an indication of the change.
  • Click on the actual shape of the polygon, away from editing handles, and drag to move it.

Additional actions that can be performed during movement are:

  • Press the Spacebar to rotate the polygon counterclockwise, or Shift+Spacebar for clockwise rotation. Rotation is in accordance with the value for the Rotation Step defined on the PCB Editor – General page of the Preferences dialog.
  • Press the L key to flip the polygon to the other side of the board.
  • Press the X or Y keys to mirror the polygon along the X-axis or Y-axis respectively.

After modifying the shape or location of the polygon pour, it will become marked as modified. If the Repour Polygons After Modification option is enabled on the PCB Editor - General page of the Preferences dialog, the polygon (and all of its dependants) will be repoured automatically. If this option is not enabled, the polygon pour will not be repoured.

Tips

  1. A modified polygon pour is one that has been changed in some way, but has not yet been repoured. Its IsModified property - which can be seen from the PCB List panel for a selected polygon pour - is enabled (True).

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

You are reporting an issue with the following selected text
and/or image within the active document:
ALTIUM DESIGNER FREE TRIAL
Altium Designer Free Trial
Let’s get started. First off, are you or your organization already using Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

In that case, why do you need an evaluation license?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You actually don’t need an evaluation license for that.

Click the button below to download the latest Altium Designer installer.

Download Altium Designer Installer

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Please fill out the form below to get a quote for a new seat of Altium Designer.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

If you are on Altium Subscription, you don’t need an evaluation license.

If you are not an active Altium Subscription member, please fill out the form below to get your free trial.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Why are you looking to evaluate Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

You came to the right place! Please fill out the form below to get your free trial started.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

That’s great! Making things is awesome. We have the perfect program for you.

Upverter is a free community-driven platform designed specifically to meet the needs of makers like you.

Click here to give it a try!

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.