Query_Lang-PCBFunctions_AttributeChecks_CompCenterOfPadsXCompCenterOfPadsX_AD

Вы просматриваете версию 18.1. Для самой новой информации, перейдите на страницу Query_Lang-PCBFunctions_AttributeChecks_CompCenterOfPadsX((CompCenterOfPadsX))_AD для версии 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: PCB Query Functions - Attribute Checks

Summary

Returns component objects when the X-Coordinate of the centroid of their pads complies with the Query.

Syntax

CompCenterOfPadsX : Number

The entered coordinate is always in units of mils regardless of the measurement unit chosen for the board. (1 mil = 0.001 inch).

Example Usage

CompCenterOfPadsX = 1200
Returns all component objects when the X-Coordinate of the centroid of their pads is equal to 1200mil.

CompCenterOfPadsX >= 1500
Returns all component objects when the X-Coordinate of the centroid of their pads is greater than, or equal to, 1500mil.

CompCenterOfPadsX Between 1000 And 1400
Returns all component objects when the X-Coordinate of the centroid of their pads is greater than, or equal to, 1000mil, and less than, or equal to, 1400mil.

CompCenterOfPadsX < 800
Returns all objects except component objects when the X-Coordinate of the centroid of their pads is greater than, or equal to, 800mil.

Tip

  • The associated child objects of the complying component objects are also returned.
Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.