Query_Lang-PCBFunctions_Fields_PadYSize_TopLayerPadYSize_TopLayer_AD

您正在阅读的是 18.1. 版本。关于最新版本,请前往 Query_Lang-PCBFunctions_Fields_PadYSize_TopLayer((PadYSize_TopLayer))_AD 阅读 21 版本
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: PCB Query Functions - Fields

Summary

Returns pad objects whose Y Size (Top Layer) property complies with the Query.

Syntax

PadYSize_TopLayer : Number

Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).

A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:

  • AsMils(PadYSize_TopLayer) : Number – to specify a size in mil.
  • AsMM(PadYSize_TopLayer) : Number – to specify a size in mm.

Example Usage

PadYSize_TopLayer = 100
Returns all pad objects whose Y Size (Top Layer) property is equal to 100 current measurement units.

PadYSize_TopLayer >= 4.064
Returns all pad objects whose Y Size (Top Layer) property is greater than, or equal to, 4.064 current measurement units.

AsMils(PadYSize_TopLayer) > 80
Returns all pad objects whose Y Size (Top Layer) property is greater than 80mil.

AsMM(PadYSize_TopLayer) Between 1.524 And 3.81
Returns all pad objects whose Y Size (Top Layer) property is greater than or equal to 1.524mm and less than or equal to 3.81mm.

PadYSize_TopLayer <> 50
Returns all pad objects whose Y Size (Top Layer) property is not equal to 50 current measurement units.

Tips

  1. For simple pads (with Stack Mode set to Simple) the Y Size (Top Layer) property will be the same as the Y Size (All Layers) property, since the specified size is used for all signal layers.
  2. The Y Size (Top Layer) property is only defined for pad objects.

 

可用的功能取决于您的 Altium Designer 软件订阅级别