Altium Designer Documentation

Query_Lang-PCBFunctions_Fields_ViaSize_MidLayer19ViaSize_MidLayer19_AD

Created: June 23, 2017 | Updated: October 9, 2017
您正在阅读的是18.1版本。 关于最新版本,请前往阅读21版本

Parent page: PCB Query Functions - Fields

Summary

Returns via objects whose X Size (Mid Layer 19) property complies with the Query.

Syntax

ViaSize_MidLayer19 : Number

Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).

A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:

  • AsMils(ViaSize_MidLayer19) : Number – to specify a size in mil.
  • AsMM(ViaSize_MidLayer19) : Number – to specify a size in mm.

Example Usage

ViaSize_MidLayer19 = 100
Returns all via objects whose X Size (Mid Layer 19) property is equal to 100 current measurement units.

ViaSize_MidLayer19 >= 4.064
Returns all via objects whose X Size (Mid Layer 19) property is greater than, or equal to, 4.064 current measurement units.

AsMils(ViaSize_MidLayer19) > 80
Returns all via objects whose X Size (Mid Layer 19) property is greater than 80mil.

AsMM(ViaSize_MidLayer19) Between 1.524 And 3.81
Returns all via objects whose X Size (Mid Layer 19) property is greater than or equal to 1.524mm and less than or equal to 3.81mm.

ViaSize_MidLayer19 <> 50
Returns all via objects whose X Size (Mid Layer 19) property is not equal to 50 current measurement units.

Tips

  1. For simple vias (with Stack Mode set to Simple) the X Size (Mid Layer 19) property will be the same as the X Size (All Layers) property, since the specified size is used for all signal layers.
  2. For Top-Middle-Bottom vias (with Stack Mode set to Top-Middle-Bottom) the X Size (Mid Layer 19) property will be the same as the X Size (Mid Layer 1) property, since the size specified for Signal Layer 1 is applied to all internal ('middle') signal layers.
  3. When viewing the properties for a selected via in the Size and Shape section of the Properties panel, the X Size (Mid Layer 19) property corresponds to:
    1. The Diameter field for Mid Layer 19 when the mode is set to Full Stack.
    2. The Diameter field for Mid Layer 1 when the mode is set to Top-Middle-Bottom.
    3. The Diameter field when the mode is set to Simple.
  4. The X Size (Mid Layer 19) property is only defined for pad and via objects.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: