Altium Designer Documentation

ToggleSelectedSheetEntryIO

Created: September 27, 2017 | Updated: January 30, 2019

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: ObjectKind=SheetEntry

Summary

This command is used to toggle the I/O Type for all selected sheet entries, on the current schematic sheet, simultaneously and where applicable, and irrespective of sheet symbol to which they are associated.

Access

This command can be accessed in the Schematic Editor, by:

  • Choosing the Edit » Move » Toggle Selected Sheet Entries IO Type command from the main menus.
  • Locating and using the Toggle Selected Sheet Entries IO Type command on the Active Bar.
If the command has been recently used from the Active Bar, it will become the active/visible button. Where other commands are available, this is indicated by a triangle at the bottom-right corner of the button. Click and hold on the active button to access a menu of all associated commands for that grouping.
The command will only be available provided at least one sheet entry is currently selected on the active schematic sheet.

Use

After launching the command, the I/O Type defined for each sheet entry will be toggled, where applicable. The actual change depends on the current I/O Type as follows:

  • Unspecified remains Unspecified.
  • Output changes to Input.
  • Input changes to Output.
  • Bidirectional remains Bidirectional.


Applied Parameters: ContextSensitive=True|ObjectKind=SheetEntry

Summary

This command is used to toggle the I/O Type for one or more selected sheet entries, on the current schematic sheet, simultaneously and where applicable, and irrespective of sheet symbol to which they are associated.

Access

This command is accessed in the Schematic Editor, by right-clicking over a selected sheet entry (or a sheet entry that is part of a group of selected sheet entries) and choosing the Sheet Entry Actions » Toggle Selected Sheet Entries IO Type command from the context menu.

The command will only be available on the menu provided at least one sheet entry is currently selected on the active schematic sheet.

Use

After launching the command, the I/O Type defined for each sheet entry will be toggled, where applicable. The actual change depends on the current I/O Type as follows:

  • Unspecified remains Unspecified.
  • Output changes to Input.
  • Input changes to Output.
  • Bidirectional remains Bidirectional.


Applied Parameters: ContextSensitive=True|ObjectKind=Port

Summary

This command is used to toggle the I/O Type for one or more ports, on the current schematic sheet, simultaneously and where applicable.

Access

This command is accessed in the Schematic Editor, by:

  • Right-clicking over a placed port (not selected) and choosing the Port Actions » Toggle Port IO Type command from the context menu.
  • Right-clicking over a selected port (or a port that is part of a group of selected ports) and choosing the Port Actions » Toggle Selected Ports IO Type command from the context menu.

Use

After launching the command, the I/O Type defined for each port will be toggled, where applicable. The actual change depends on the current I/O Type as follows:

  • Unspecified remains Unspecified.
  • Output changes to Input.
  • Input changes to Output.
  • Bidirectional remains Bidirectional.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。