Query_Lang-PCBFunctions_Fields_HoleDiameterHoleDiameter_AD

現在、バージョン 18.1. をご覧頂いています。最新情報については、バージョン Query_Lang-PCBFunctions_Fields_HoleDiameter((HoleDiameter))_AD の 21 をご覧ください。
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: PCB Query Functions - Fields

Summary

Returns all pad and via objects whose Hole Size property complies with the Query.

Syntax

HoleDiameter : Number

Number will follow the measurement units currently employed for the document – either Imperial (mil; 1mil = 0.001inch) or Metric (mm; 1mm = 0.001meter).

A specific option for the measurement unit can be specified – overriding the default units specified at the document level – through use of an additional measurement unit-based keyword:

  • AsMils(HoleDiameter) : Number – to specify a hole diameter in mil.
  • AsMM(HoleDiameter) : Number – to specify a hole diameter in mm.

Example Usage

HoleDiameter = 16
Returns all pad and via objects that have a Hole Size property which is 16 current measurement units.

HoleDiameter >= 0.508
Returns all pad and via objects that have a Hole Size property which is greater than or equal to 0.508 current measurement units.

AsMils(HoleDiameter) Between 12 And 32
Returns all pad and via objects that have a Hole Size property which is greater than or equal to 12mil and less than or equal to 32mil.

AsMM(HoleDiameter) < 1.016
Returns all pad and via objects that have a Hole Size property which is less than 1.016mm.

Tips

  1. The Hole Size property is only defined for pad and via objects.
  2. This function is an alias for the HoleSize and Hole functions.

 

注記

利用できる機能は、Altium Designer ソフトウェア サブスクリプション のレベルによって異なります。