Altium Designer Documentation

MirrorSelectedSheetSymbol

Created: September 27, 2017 | Updated: August 1, 2018

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Axis=X|ObjectKind=SheetSymbol

Summary

This command is used to flip one or more selected sheet symbols along the X-axis.

Access

With the required sheet symbol(s) selected in the main design workspace, this command can be accessed from the Schematic Editor by:

  • Choosing the Edit » Move » Flip Selected Sheet Symbols Along X command from the main menus.
  • Locating and using the Flip Selected Sheet Symbols Along X command on the Active Bar.
If the command has been recently used from the Active Bar, it will become the active/visible button. Where other commands are available, this is indicated by a triangle at the bottom-right corner of the button. Click and hold on the active button to access a menu of all associated commands for that grouping.

Use

First, ensure that the required sheet symbol(s) to be flipped is selected in the main design workspace.

After launching the command, what happens next is determined by the number of sheet symbols selected:

  • Single Sheet Symbol - the sheet entries associated with the symbol will be swapped to the opposite side of the symbol (in the horizontal plane) - those on the left will be repositioned on the right and vice-versa.
  • Multiple Sheet Symbols - the symbols will be flipped about an imaginary vertical line which is located mid-way between the bounding extents of the symbols in the selection. The sheet entries associated with each symbol will be swapped to the opposite side of the symbol (in the horizontal plane) - those on the left will be repositioned on the right and vice-versa.

The I/O Type of sheet entries is not altered.

Tips

  1. If a sheet symbol is locked, you will be prompted with a confirmation dialog alerting you to this and asking if you want to continue. However, if a sheet entry is locked, it will still be flipped to the opposite side of its parent sheet symbol (i.e. the lock is ignored).


Applied Parameters: ContextSensitive=True|Axis=X|ObjectKind=SheetSymbol

Summary

This command is used to flip one or more sheet symbols along the X-axis.

Access

This command is accessed in the Schematic Editor, by:

  • Right-clicking over a placed sheet symbol (not selected) then choosing the Sheet Symbol Actions » Flip Sheet Symbol Along X command from the context menu.
  • Right-clicking over a selected sheet symbol (or a sheet symbol that is part of a group of selected sheet symbols) then choosing the Sheet Symbol Actions » Flip Selected Sheet Symbols Along X command from the context menu.

Use

First, ensure that the cursor is positioned over the required sheet symbol (if flipping a single symbol), or that the required sheet symbols to be flipped are selected (if flipping multiple symbols), and that the cursor is positioned over one of the symbols in the selection.

After launching the command, what happens next is determined by the number of sheet symbols involved:

  • Single Sheet Symbol - the sheet entries associated with the symbol will be swapped to the opposite side of the symbol (in the horizontal plane) - those on the left will be repositioned on the right and vice-versa.
  • Multiple Sheet Symbols - the symbols will be flipped about an imaginary vertical line which is located mid-way between the bounding extents of the symbols in the selection. The sheet entries associated with each symbol will be swapped to the opposite side of the symbol (in the horizontal plane) - those on the left will be repositioned on the right and vice-versa.

The I/O Type of sheet entries is not altered.

Tips

  1. If a sheet symbol is locked, you will be prompted with a confirmation dialog alerting you to this and asking if you want to continue. However, if a sheet entry is locked, it will still be flipped to the opposite side of its parent sheet symbol (i.e. the lock is ignored).


Applied Parameters: Axis=Y|ObjectKind=SheetSymbol

Summary

This command is used to flip one or more selected sheet symbols along the Y-axis.

Access

With the required sheet symbol(s) selected in the main design workspace, this command can be accessed from the Schematic Editor by:

  • Choosing the Edit » Move » Flip Selected Sheet Symbols Along Y command from the main menus.
  • Locating and using the Flip Selected Sheet Symbols Along Y command on the Active Bar.
If the command has been recently used from the Active Bar, it will become the active/visible button. Where other commands are available, this is indicated by a triangle at the bottom-right corner of the button. Click and hold on the active button to access a menu of all associated commands for that grouping.

Use

First, ensure that the required sheet symbol(s) to be flipped are selected in the main design workspace.

After launching the command, what happens next is determined by the number of sheet symbols selected:

  • Single Sheet Symbol - the sheet entries associated with the symbol will be swapped to the opposite side of the symbol (in the vertical plane) - those at the top will be repositioned at the bottom and vice-versa.
  • Multiple Sheet Symbols - the symbols will be flipped about an imaginary horizontal line which is located mid-way between the bounding extents of the symbols in the selection. The sheet entries associated with each symbol will be swapped to the opposite side of the symbol (in the vertical plane) - those at the top will be repositioned at the bottom and vice-versa.

The I/O Type of sheet entries is not altered.

Tips

  1. If a sheet symbol is locked, you will be prompted with a confirmation dialog alerting you to this and asking if you want to continue. However, if a sheet entry is locked, it will still be flipped to the opposite side of its parent sheet symbol (i.e. the lock is ignored).


Applied Parameters: ContextSensitive=True|Axis=Y|ObjectKind=SheetSymbol

Summary

This command is used to flip one or more sheet symbols along the Y-axis.

Access

This command is accessed in the Schematic Editor by:

  • Right-clicking over a placed sheet symbol (not selected) then choosing the Sheet Symbol Actions » Flip Sheet Symbol Along Y command from the context menu.
  • Right-clicking over a selected sheet symbol (or a sheet symbol that is part of a group of selected sheet symbols) then choosing the Sheet Symbol Actions » Flip Selected Sheet Symbols Along Y command from the context menu.

Use

First, ensure that the cursor is positioned over the required sheet symbol (if flipping a single symbol), or that the required sheet symbols to be flipped are selected (if flipping multiple symbols), and that the cursor is positioned over one of the symbols in the selection.

After launching the command, what happens next is determined by the number of sheet symbols involved:

  • Single Sheet Symbol - the sheet entries associated with the symbol will be swapped to the opposite side of the symbol (in the vertical plane) - those at the top will be repositioned at the bottom and vice-versa.
  • Multiple Sheet Symbols - the symbols will be flipped about an imaginary horizontal line which is located mid-way between the bounding extents of the symbols in the selection. The sheet entries associated with each symbol will be swapped to the opposite side of the symbol (in the vertical plane) - those at the top will be repositioned at the bottom and vice-versa.

The I/O Type of sheet entries is not altered.

Tips

  1. If a sheet symbol is locked, you will be prompted with a confirmation dialog alerting you to this and asking if you want to continue. However, if a sheet entry is locked, it will still be flipped to the opposite side of its parent sheet symbol (i.e. the lock is ignored).

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

お問合せ

お近くの営業所にお問合せください。

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 無償評価版
Altium Designer 無償評価版
Altium Designerを使用していますか?

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

評価版ライセンスが必要な理由を下記から選択してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

その場合、評価版ライセンスは不要です。

ボタンをクリックして、最新のAltium Designerインストーラをダウンロードしてください。

Altium Designerインストーラをダウンロードする

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

Altium Designerの新規ライセンスのお見積もりをご希望の場合、下記のフォームに入力してください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Altium Designerサブスクリプションをご利用中の場合、評価版ライセンスは不要です。

お客様がAltium Designerサブスクリプションの有効なメンバーではない場合、下記のフォームに入力して無償評価版をダウンロードしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Altium Designerを評価する理由を下記から選択してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

無償評価版を使用するには、下記のフォームに入力してください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。

下記のフォームに入力してライセンスをリクエストしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

素晴らしいですね。アルティウムではモノづくりに最適なプログラムを提供しています。

Upverterは、コミュニティ主導型の無償プラットフォームで、お客様のような作り手の要求に合わせて設計されています。

試してみる場合、こちらをクリック してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。

下記のフォームに入力してライセンスをリクエストしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。