Sch_Dlg-TemplateUpdateOptionsFormUpdate Template_AD

現在、バージョン 21. をご覧頂いています。最新情報については、バージョン Sch_Dlg-TemplateUpdateOptionsForm((Update Template))_AD の 22 をご覧ください。
Applies to Altium Designer versions: 19.0, 19.1, 20.0, 20.1, 20.2 and 21


The Update Template dialog

Summary

The Update Template dialog allows you to quickly update one or more source schematic documents with any changes to their respective current templates (where used), including any changes that have been made to parametric information (used typically in the title block region of a template sheet).

  • The template associated with a schematic document can be specified using the various Change Current Template commands, accessed from the Design » Templates menu.
  • The current template file associated with a schematic document can be viewed in the Page Options region of the Properties panel in Document Options mode.

Access

The dialog is accessed by clicking Design » Templates » Update Current Template command from the main menus, or by clicking the button associated with a Template setting in the Page Options section of the Properties panel.

Options/Controls

  • Choose Document Scope – choose one of the following options to determine the scope of the update:
    • Just this document – choose this option to update the active schematic document only with changes to its current template.
    • All schematic documents in the current project – choose this option to update the active schematic document and all other schematic documents in the active project with changes to their respective current templates. Schematics that are currently closed will be opened.
    • All open schematic documents – choose this option to update the active schematic document and all other open schematic documents (regardless of parent project) with changes to their respective current templates.
  • Choose Parameter Actions – choose one of the following options to determine how parameter changes are handled:
    • Do not update any parameters – choose this option to leave all parameters sourced from the associated template unchanged.
    • Add new parameters that exist in the template only – choose this option to add any parameters that exist in the template but do not currently exist on the schematic sheet.
    • Replace all matching parameters – choose this option to update the value of each parameter that is found to exist in both the template and the schematic sheet with the value present in the template.
注記

利用できる機能は、Altium Designer ソフトウェア サブスクリプション のレベルによって異なります。