IntegratedLibrary_Dlg-DeviceSheetListFormSelect Device Sheet_AD
Created: июня 30, 2017 | Updated: декабря 14, 2018
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21
Вы просматриваете версию 20.2. Для самой новой информации, перейдите на страницу IntegratedLibrary_Dlg-DeviceSheetListForm((Select Device Sheet))_AD для версии 22
The Select Device Sheet dialog
Summary
The Select Device Sheet dialog provides controls to select a device sheet to be placed in the schematic sheet.
Access
From the schematic editor, this dialog is accessed in the following ways:
- Select Place » Device Sheet Symbol from the toolbar.
- Right-click then select Place » Device Sheet Symbol from the context menu.
- Click
in the Active Bar. - Click the button on the Wiring toolbar.
Options/Controls
- Device Sheet Folders List - the left side of the dialog lists all source device sheet folders added to the project.
- Filter - enter the desired characters to filter target devices sheets.
- Device Sheets List - the right side of the dialog list all devices sheets that exist in the selected folder.
- Device Sheet Folders - click to open the Device Sheet Folders dialog in which you can add, remove, or reorder source device sheet folders.
