Документация Altium Designer
...
((Dialog Reference))_AD
Dialogs((M to R))_AD
WorkspaceManager_Dlg-ReportComponentsSetup_FormReport Manager_AD
Created: августа 25, 2016 | Updated: марта 06, 2024
| Applies to versions: 17.0 and 17.1
Вы просматриваете версию 17.1. Для самой новой информации, перейдите на страницу WorkspaceManager_Dlg-ReportComponentsSetup_Form((Report Manager))_AD для версии 22
Three variations of the Report Manager dialog
Summary
This dialog enables you to configure a Bill of Materials report or a Component Cross Reference report. You can configure the information for the report and export it in various formats.
Access
The Report Manager dialog is accessed in the following ways:
- For a Bill of Materials report, click Reports » Bill of Materials. You can also click on the Default Prints tab of the Project Options dialog under Report Outputs, then click Bill of Materials then Configure.
- For a Component Cross Reference report, click Reports » Component Cross Reference from a schematic document.
Options/Controls
Grouped Columns
- Show - check the Show box to add the desired corresponding data to the grid area.
All Columns
The All Columns section is sourced from the properties of all components on the document (or the source documents if a project is open) for which the report is being generated.
- Show - Check the Show box to add the desired corresponding data to the grid area.
Grid
The displayed data is defined by the checked boxes in the Grouped Columns and All Columns regions. Click the down arrow next to each heading to filter the information in the grid by the desired listed items.
Source Options
- Include Not Fitted Components - check this option to include components that are not fitted.
- Include Parameters From PCB - check this option to include parameters from the PCB (e.g., Layer). If it is checked, the parameters will be shown in the All Columns region.
- Include Parameters From Vault - if the component is from the Vault, select this option to include parameters. If it is checked, the parameters will be shown in the All Columns region.
- Include Parameters From Database - include (make available) parameters from an external database that is linked (through a DbLink/DbLib/SVNDbLib file) to components in the design. When this option is checked, the database
parameters for the matched component records, and that are not part of the Altium Designer components, are presented in the All Columns region.
- Include in Component Variations - check this option to include parameters from any component variations.
- Include Alternative Items - check this option to include alternative items in the BOM document. If this option is checked, a column titled Alternative Group Name will appear in the grid. This option is available only when the Bill of Materials uses an ActiveBOM (*.BomDoc) as its data source.
Supplier Options
- Supplier Currency - use the drop-down to select the desired currency.
- Production Quantity - use the arrows to select the quantity that needs to be ordered to produce the given product quantity.
- Round up Supplier Order Qty to cheaper price break - the Supplier Order Quantity is used to determine the Supplier Unit Price that applies. Suppliers typically offer various quantity pricing levels depending on how many units of an item you purchase. To have Altium Designer round up the Supplier Order Quantity to take advantage of the next (reduced) pricing level, enable this option.
- Use cached pricing data in parameters if offline - enable this option when working offline to use the last cached pricing data.
Export Options
- File Format - select a format from the drop-down list. The following file formats are supported:
- CSV (Comma Delimited) (*.csv)
- Microsoft Excel Worksheet (*.xls, *.xlsx, *.xlt, *.xltx)
- Portable Document Format (*.pdf)
- Tab Delimited Text (*.txt)
- Web Page (*.htm, *.html)
- XML Spreadsheet (*.xml)
- Add to Project - check to have the generated report added to the project after it is created.
- Open Exported - check to open the relevant software application, e.g., Microsoft Excel, once the exported file has been saved.
Excel Options
- Template - enter the desired Excel template file by either typing the file name into the text box, using the drop-down and selecting a template file (*.xlt), or browsing for the template file by clicking ... .
Additional Controls
- Menu - click to access a menu of options including the following:
- Export - click to save the generated data to another location.
- Report - click to open the Report Preview dialog from where you can print the report.
- Column Best Fit - click to adjust the column widths to fit the current view.
- Force Columns to View - click to view all columns automatically.
- Change PCB Document - click to change to another PCB document.
- Change Variant - click to change the variant.
- Export - click to generate the report.