Altium Designer Documentation

Board Outline Creation Successful

Created: September 29, 2017 | Updated: September 29, 2017
您正在阅读的是18.0版本。 关于最新版本,请前往阅读22版本

The Board Outline Creation Successful dialog
The Board Outline Creation Successful dialog

Summary

The Board Outline Creation Successful dialog provides controls to adjust the board outline's alignment when defining the board shape based on an existing 3D body. DRC checking for the model part also can be disabled and hidden.

Access

The dialog is accessed from the 3D mode of the PCB Editor by clicking Design » Board Shape » Define from 3D body from the main menus then selecting a 3D body on the board.

Options/Controls

  • Hide and disable DRC checking for the model part - enable to hide and disable any DRC checking for the model part. This option is enabled by default. 
  • Modify model height - select the option desired for determining how the 3D model is aligned with the board. The options are:
    • To align face with top PCB board surface
    • To align face with bottom PCB board surface
    • Do not modify model position
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: