Altium Designer Documentation

Board Region

Created: July 28, 2015 | Updated: June 16, 2017


The Board Region Dialog.

Summary

This dialog provides controls related to board region layer stack assignment.

Access

Make sure the board shape is divided into at least two regions, double click a board region to access this dialog.

Options/Controls

  • Name - Type in a suitable name for this board region.
  • Layer stack - Choose a layer stack from the drop-down list to assign to this board region.
  • Custom Coverlays - Enable this option to add Custom Coverlay to the Layer Stack Manager and allow the board shape to be manipulated in Board Planning Mode.
  • 3D Locked - Enable this option to lock this board region in 3D mode. At least one board region must be locked to be able to fold the board around the bend lines. 
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: