Altium Designer Documentation

ChangeCurrentTemplate

Created: February 10, 2021 | Updated: February 10, 2021

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: TemplateSource=Local

Summary

This command is used to access the relevant sub-menu command to define the local template. A schematic template is a document that holds user-defined sheet size, border and title block descriptions that can be referenced by (linked to) a schematic sheet negating the need to define these common attributes again and again.

Access

This command can be accessed from the schematic editor by choosing Design » Sheet Templates » Local from the main menus or from the Design pop-up menu (D) in the design space.

Use

Select the required local template from the list in the sub-menu. The Update Template dialog opens in which you can update to the current template then an Information dialog opens displaying that the template was updated.


Applied Parameters: TemplateSource=Server

Summary

This command is used to access the relevant sub-menu command to define the server template. A schematic template is a document that holds user-defined sheet size, border and title block descriptions that can be referenced by (linked to) a schematic sheet negating the need to define these common attributes again and again.

Access

This command can be accessed from the schematic editor by choosing Design » Sheet Templates » Local from the main menus or from the Design pop-up menu (D) in the design space.

Use

Select the required server template from the list in the sub-menu. The Update Template dialog opens in which you can update to the current template then an Information dialog opens displaying that the template was updated.

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: