Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
Sch_Dlg-ChooseDocumentToPlaceChoose Document to Place_AD
Created: February 06, 2019 | Updated: February 06, 2019
| Applies to versions: 19.0, 19.1, 20.0, 20.1 and 20.2
Now reading version 20.0. For the latest, read: Sch_Dlg-ChooseDocumentToPlace((Choose Document to Place))_AD for version 21
The Choose Document to Place dialog
Summary
This dialog allows you to choose the target schematic document that is to be referenced by a newly-created sheet symbol when using the Create Sheet Symbol From Sheet command.
Access
The dialog is accessed from the schematic editor in the following ways:
- Click Design » Create Sheet Symbol From Sheet from the main menus.
- Right-click in the design workspace away from any design objects then click Sheet Actions » Create Sheet Symbol From Sheet.
Options/Controls
The main area of the dialog lists all candidate schematic documents for the project that legitimately can be used as the target reference sub-sheet for the new sheet symbol. Each document is listed in terms of its name and path to the folder in which it resides. Click on an entry to select the required document.
