Parent page: Schematic Commands
The following pre-packaged resources, derived from this base command, are available:
Increment Part NumberExpandСвернуть
Applied Parameters: None
Summary
This command is used to visually cycle forward through the available part numbers for a placed multi-part component.
Access
This command is accessed from the Schematic Editor by choosing the Edit » Increment Part Number command from the main menus.
Use
After launching the command, the cursor will change to a cross-hair and you will be prompted to choose a part. Position the cursor over the multi-part component whose part you wish to increment then click or press Enter. The symbol graphic (and designator) will change accordingly to display the next sequential part for that component.
Continue cycling through part numbers for the same or other multi-part components, or right-click or press Esc to exit part increment mode.
