Working with a Round Rectangle Object on a Schematic Sheet in Altium Designer

This document is no longer available beyond version 21. Information can now be found here: Round Rectangle for version 24

Applies to Altium Designer version: 21
 

Parent page: Schematic Objects

 A placed Round Rectangle

A placed Round Rectangle

Summary

A round rectangle is a non-electrical drawing primitive. It is essentially a rectangle object with rounded corners that can be placed on a schematic sheet and can be filled or unfilled.

Availability

Round rectangles are available for placement in both Schematic and Schematic Library Editors:

  • Schematic Editor - the following commands are available:
    • Choose Place » Drawing Tools » Round Rectangle from the main menus.
    • Click the Round Rectangle button () in the graphic objects drop-down on the Active Bar located at the top of the design space. (Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the top-most item on that section of the Active Bar.)
    • Right-click in the design space then choose Place » Drawing Tools » Round Rectangle from the context menu.
    • Click the  button on the Utility Tools drop-down () of the Utilities toolbar.
  • Schematic Library Editor - the following commands are available:
    • Choose Place » Round Rectangle from the main menus.
    • Click the Round Rectangle button () in the graphic objects drop-down on the Active Bar menu located at the top of the design space. (Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the top-most item on that section of the Active Bar.)
    • Right-click in the design space then choose Place » Round Rectangle from the context menu.
    • Click the  button on the Utility Tools drop-down () of the Utilities toolbar.

Placement

After launching the command, the cursor will change to a cross-hair and you will enter round rectangle placement mode. Placement is made by performing the following sequence of actions:

  1. Click or press Enter to anchor the first corner of the round rectangle.
  2. Move the cursor to adjust the size of the round rectangle then click or press Enter to complete placement.
  3. Continue placing further round rectangles or right-click or press Esc to exit placement mode.

Additional actions that can be performed during placement while the round rectangle is still floating on the cursor and before its first corner is anchored are:

  • Press the Tab key to pause the placement and access the Round Rectangle mode of the Properties panel from where its properties can be changed on the fly. Click the design space pause button overlay ( ) to resume placement.
  • Press the Alt key to constrain the direction of movement to the horizontal or vertical axis depending on the initial direction of movement.
  • Press the Spacebar to rotate the round rectangle counterclockwise or Shift+Spacebar for clockwise rotation. Rotation is in increments of 90°.
  • Press the X or Y keys to mirror the round rectangle along the X-axis or Y-axis.

While attributes can be modified during placement (Tab to access the Properties panel), keep in mind that these will become the default settings for further placement unless the Permanent option on the Schematic – Defaults page of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.

Graphical Editing

This method of editing allows you to select a placed round rectangle object directly in the design space and change its size, shape or location graphically.

When a rounded rectangle object is selected, the following editing handles are available:

 A selected Round Rectangle A selected Round Rectangle

  • Click and drag A to resize the round rectangle in the vertical and horizontal directions simultaneously.
  • Click and drag B to resize the round rectangle in the vertical and horizontal directions separately.
  • Click and drag C to change the curvature of the corners. This affects all corners equally regardless of which editing handle is chosen.
  • Click anywhere on the round rectangle away from editing handles then drag to reposition it. While dragging, the round rectangle can be rotated (Spacebar/Shift+Spacebar) or mirrored (X or Y keys to mirror along the X-axis or Y-axis).
If attempting to graphically modify an object that has its Locked property enabled, a dialog will appear asking for confirmation to proceed with the edit. If the Protect Locked Objects option is enabled on the Schematic – Graphical Editing page of the Preferences dialog, and the Locked option for that design object is enabled as well, then that object cannot be selected or graphically edited. Click the locked object to select it then disable the Locked property in the List panel or disable the Protect Locked Objects option to graphically edit the object.

Non-Graphical Editing

The following methods of non-graphical editing are available.

Editing via the Round Rectangle Dialog or Properties Panel

Panel page: Round Rectangle Properties

This method of editing uses the associated Round Rectangle dialog and the Properties panel mode to modify the properties of a round rectangle object.

The Round Rectangle dialog, on the left, and the Round Rectangle mode of the Properties panel on the right The Round Rectangle dialog, on the left, and the Round Rectangle mode of the Properties panel on the right

After placement, the Round Rectangle dialog can be accessed by:

  • Double-clicking on the placed round rectangle object.
  • Place your cursor over the round rectangle object, right-click, then choose Properties from the context menu.

During placement, the Round Rectangle mode of the Properties panel can be accessed by pressing the Tab key. Once the round rectangle is placed, all options appear.

After placement, the Round Rectangle mode of the Properties panel can be accessed in one of the following ways:

  • If the Properties panel is already active, by selecting the round rectangle object.
  • After selecting the round rectangle object, select the Properties panel from the Panels button at the bottom right of the design space or select View » Panels » Properties.
If the Double Click Runs Interactive Properties option is disabled (default) on the Schematic - Graphical Editing page of the Preferences dialog, when the primitive is double-clicked or you right-click on a selected primitive then choose Properties, the dialog will open. When the Double Click Runs Interactive Properties option is enabled, the Properties panel will open. 
While the options are the same in the dialog and the panel, the order and placement of the options may differ slightly. 

The Round Rectangle properties can be accessed prior to entering placement mode, from the Schematic – Defaults page of the Preferences dialog. This allows the default properties for the round rectangle object to be changed, which will be applied when placing subsequent round rectangles.

Editing Multiple Objects

The Properties panel supports multiple object editing, where the property settings that are identical in all currently selected objects may be modified. When multiples of the same object type are selected manually, via the Find Similar Objects dialog or through a Filter or List panel, a Properties panel field entry that is not shown as an asterisk (*) may be edited for all selected objects.

Editing via a List or Filter Panel

Panel pages: SCH List, SCHLIB List, SCH Filter, SCHLIB Filter

The panels allow you to display design objects from one or more documents in tabular format, enabling quick inspection and modification of object attributes. Used in conjunction with appropriate filtering - by using the applicable Filter panel or the Find Similar Objects dialog - it enables the display of just those objects falling under the scope of the active filter – allowing you to target and edit multiple design objects with greater accuracy and efficiency.

Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.

Content