Altium Designer Documentation

View Configuration

Modified by Susan Riege on Sep 26, 2018
此文档页面引用了不再受支持的产品 Altium Vault, Altium Vault 及其组件管理功能已迁移到 Altium Concord Pro
All Contents

Parent page: Multi-board Panels


The Multi-board Assembly editor's View Configuration panel.

Summary

The View Configuration panel is used to configure the color and workspace visibility options in the Multi-board Assembly editor. It is also used to control the display of the section view, and the section panels.

To learn more about Multi-board assemblies, refer to Creating the Physical Multi-board Assembly.

Panel Access

When a Multi-board assembly document is active, the panel can be accessed in the following ways:

  • Click View » Panels » View Configuration.
  • Click the button at the bottom-right of the work area and select the View Configuration menu option.

Content and Use

The panel content is divided into three sections:

  • Section View - options to enable and configure the section view feature, and control the display of the section panels.
  • System Colors - options to configure the visibility and color of layers.
  • Display Options - an option to enable ambient occulsion in the workspace.

The content is arranged in two collapsible sections that are opened and closed using the ► icon associated with each section heading. The information included below is arranged by matching sections, and each collapsible section is opened/closed in the same manner.

In the Multi-board Assembly editor, each workspace axis, and its corresponding plane, is assigned a color:

  • Blue - Z axis, viewing into the X-Y plane. You can think of this as the top or bottom view.
  • Red - X axis, viewing into the Y-Z plane. You can think of this as the front or rear view.
  • Green - Y axis, viewing into the X-Z plane. You can think of this as the left or right view.

A section view is a view that can be used to reveal detail within an assembly, that might normally not be visible. This is achieved by defining a plane where a section of the assembly is sliced or cut away. The Multi-board Assembly editor supports defining a section plane along each of the 3 axes, allowing the section definition to be in 1, 2 or 3 directions.

  • Section View - enable/disable the section view feature. When this option is enabled, the colored Edit Planes will be displayed. The default location is to define the section at the geometric center of the assembly, in all 3 planes. The Section View can also be toggled on/off using the Shift+Ctrl+V shortcuts.
  • Edit Panels - the panels are used to define the section location - that is, the location of the cut in each plane. Each panel includes a small arrow control, click, hold and drag on the arrow to change the location of that section plane. Alternatively, click and hold anywhere on the panel and move it, the software will attempt to select and move the panel under the cursor. When the Edit Panels Off button is clicked the panels are hidden, giving a clearer view of the sectioned assembly. Alternatively, use the Shift+Ctrl+E shortcuts to toggle the panels off and on. Note that the section plane colors continue to be applied to any object surface that is cut by the section, after the panels have been hidden.
  • Section Plane controls - these controls are used to enable sectioning in each plane, and to toggle on which side of that plane the assembly's content is to be removed.
Plane Enable Plane Change Plane Direction

 

X Plane

View » Toggle Section Plane X

1 shortcut key

View » Flip Section Plane X

Ctrl+1 shortcut

 

Y Plane

View » Toggle Section Plane Y

2 shortcut key

View » Flip Section Plane Y

Ctrl+2 shortcut

 

Z Plane

View » Toggle Section Plane Z

3 shortcut key

View » Flip Section Plane Z

Ctrl+3 shortcut

The color of each section plane is configured in the System Colors section of this panel.

EXAMPLE IMAGES

Setting the Color

Each layer includes a small color button, click this to display the color selector, as shown below.

The panel includes:

  • A history row, showing (up to) the last 10 color choices that were made.
  • A grid of 10 x 8 predefined color buttons, click a button to select that color.
  • A Custom Color row of up to 10 custom colors.

Custom colors can be defined, to do this:

  • Click Define Custom Colors to expand the color palette to also display the Custom Color Palette.
  • Use the horizontal slider in the center of the Custom Color Palette to select a base color, then click anywhere on the palette to brighten or darken that color.
  • Alternatively, enter the Hex or RGB values into the appropriate fields in the Custom Color Palette.
  • Click the Apply button to add the new color to the Custom Color row, and apply that color to the layer being edited.

Displaying or Hiding a Workspace Feature

Certain workspace features (such as Selection), can be displayed or hidden. Click the eye icon ( ) to toggle the visibility off and on. If the icon is grayed out, the visibility of that layer cannot be changed.

Ambient occlusion is a method used to approximate how bright the light should be shining on any specific part of a surface, based on the light and that surface's environment (how hidden/open it is to the ambient light source). 

  • Screen Space Ambient Occlusion - enabling this option will generally add more contrast and detail to the displayed surfaces, creating a greater sense of realism and making it easier to interpret the image. The image below shows a section of a heatsink without ambient occulsion applied. Move your cursor over the image to apply ambient occulsion, note how the extra visual detail in the heatsink fins makes it easier to interpret the image.

A section of a heatsink, without ambient occlusion applied - hover the cursor over the image to enable ambient occulsion.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。