PCB_Cmd-ShowLayerAndColorPanelShowLayerAndColorPanel_AD

Created: 六月 09, 2022 | Updated: 六月 09, 2022 | Applies to version: 22

This document is no longer available beyond version 22. Information can now be found here: The View Configuration Panel for version 24

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:

Access View Configuration Panel (Layers & Colors tab)

Expand折叠

Applied Parameters: FocusTo = LayersAndColors

Summary

This command is used to quickly access the Layers & Colors tab of the View Configuration panel.

Access

This command is accessed from the PCB Editor and the PCB Library Editor by using the L keyboard shortcut.

Use

After launching the command, the View Configuration panel will be opened (or given focus if already visible) and its Layers & Colors tab made the active tab.

Access View Configuration Panel (View Options tab)

Expand折叠

Applied Parameters: FocusTo = ViewOptions

Summary

This command is used to quickly access the View Options tab of the View Configuration panel.

Access

This command is accessed from the PCB Editor and the PCB Library Editor by using the Ctrl+D keyboard shortcut.

Use

After launching the command, the View Configuration panel will be opened (or given focus if already visible) and its View Options tab made the active tab.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

PCB_Cmd-ShowLayerAndColorPanelShowLayerAndColorPanel_AD

Summary

Access

Use

Summary

Access

Use

Was this page helpful?