Altium Designer Documentation

Library Component Rule Check

Created: October 11, 2017 | Updated: October 11, 2017
您当前阅读的版本为18.0。 关于最新版本,请参阅: 版本 22 的
All Contents


The Library Component Rule Check dialog

Summary

The Library Component Rule Check dialog provides controls to run a component rule check in the schematic library editor that generates a text report for specified settings.

Access

From the schematic library editor, click Reports » Component Rule Check from the main menus.

Options/Controls

Duplicate

  • Component Names - enable this option to check for duplicated component names.
  • Pins - enable this option to check for duplicated pins.

Missing

  • Description - enable this option to check for missing descriptions.
  • Footprint - enable this option to check for missing footprint names.
  • Default Designator - enable this option to check for missing default designators.
  • Pin Name - enable this option to check for missing pin names.
  • Pin Number - enable this option to check for missing pin numbers.
  • Missing Pins In Sequence - enable this option to check for missing pins in a sequence.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: