Altium Designer Documentation

Place Specific NoERC

Created: July 28, 2015 | Updated: June 19, 2017
您正在阅读的是18.0版本。 关于最新版本,请前往阅读19.1版本

The Place Specific NoERC dialog.
The Place Specific NoERC dialog.

Summary

The Specific No ERC dialog allows the designer to suppress specific errors or warnings resulting from a Project Compile.  

Access

The Specific No ERC dialog can be accessed from the (Place » Directives » Place Specific No ERC) menu.  

Options/Controls

  • Compile Errors by Net - This column displays nets in the current project that have errors or warnings resulting from a compile.
  • Suppress - This column allows designers to select specific nets to be included by the No ERC.
  • Show selected net - Zoom to the schematic for the selected net in the Compile Errors by Net column.
  • Recompile Project - Click to compile all schematic pages in the project.
  • Automatically recompile - Enable to automatically recompile while placing directives, to ensure the list remains accurate.
  • Automatically show selected - Click to zoom to the corresponding schematic net selected from the Compile Errors by Net column.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: