UnifiedComponent_Cmd-CopyComponentCopyComponent_AD

Created: 八月 08, 2017 | Updated: 八月 08, 2017 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

您正在阅读的是 19.0. 版本。关于最新版本，请前往 Cut, Copy and Paste Component 阅读 25 版本

Parent page: UnifiedComponent Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None

Summary

This command is used to copy the selected component definition(s) from the active Component Library document, to the clipboard.

Access

With the required component definition(s) selected, this command can be accessed from the Component Library Editor, when configured in Batch Editor mode, by:

Choosing the Edit » Copy Component command from the main menus.
Right-clicking over a component definition in the selection, and choosing the Copy Component command from the context menu.
Using the Shift+Ctrl+C keyboard shortcut.

If the Component Library Editor is currently in Single Component Editor mode, switch to the Batch Editor mode using the Tools » Switch to Batch Editor command.

Use

First, select the component definition(s) you wish to copy. After launching the command, the selection will be copied to the clipboard.

Tips

Copy data into an external spreadsheet application, from where changes can be made as required using the cell editing power that only a spreadsheet editor can bring. Then paste the altered data back into the Component Library file – the most expedient way to build component definitions.
To quickly duplicate a single component definition, use the Clone Component command.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

UnifiedComponent_Cmd-CopyComponentCopyComponent_AD

Summary

Access

Use

Tips

Was this page helpful?