Altium Designer Documentation

Create Differential Pairs From Nets

Created: October 26, 2017 | Updated: October 27, 2017
您正在阅读的是18.0版本。 关于最新版本,请前往阅读22版本


The Create Differential Pairs From Nets dialog

Summary

The Create Differential Pairs From Nets dialog provides controls to create differential pair objects using net names conforming to a naming convention with a common prefix, followed by a consistent positive/negative suffix, for example, TX0_P and TX0_N.

Access

The dialog is accessed from the PCB panel by clicking the Create From Nets button (lower left area of the panel) when in Differential Pairs Editor mode.

Options/Controls

The filters at the top of the dialog can be used to show net pairs based on existing net names.

  • Use nets from class - click to choose the source net class from which differential pairs will be created. The default is All Nets.
  • differing by - specify a suffix for positive and negative nets. The default values are _H and _L.
  • to create differential pair with prefix - specify the prefix for positive and negative nets. The default value is D_.
  • Create differential pairs in class - choose the target class in which the differential pairs will be located.
  • Differential Pairs List - lists all differential pairs created from nets.
  • Execute - click to create differential pairs.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: