PCB_Dlg-LayerFormEdit Layer_AD

Вы просматриваете версию 17.1. Для самой новой информации, перейдите на страницу PCB_Dlg-LayerForm((Edit Layer))_AD для версии 22
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0, 17.1 and 18.0

The Edit Layer dialog
The Edit Layer dialog

Summary

This dialog allows you to edit the layer name and copper thickness.

Access

In the PCB editor, double-click on a Layer tab at the bottom of the workspace.

Options/Controls

  • Name - Create or edit the layer's name in this field.
  • Copper thickness - Enter copper thickness for the layer in this field. Use the Ctrl+Q hotkey to switch between unit measurements (mm or mil).

When an internal plane is selected, the dialog will appear as below:

  • Name - Create or edit the internal plane's name in this field.
  • Copper thickness - Enter copper thickness for the internal plane in this field. Use the Ctrl+Q hotkey to switch between unit measurements (mm or mil).
  • Net name - Choose a net from drop-down list to assign to the internal plane.
  • Pullback - Enter the pullback value for the internal plane.
Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.