Altium Designer Documentation

ReportComponent

Created: 09.06.2017 | Updated: 28.07.2018

Parent page: Schematic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to generate a report listing information about the active component in the current document.

Access

This command is accessed from the Schematic Library Editor by choosing the Reports » Component command from the main menus.

Use

After launching the command, a text file is generated (<LibraryName>.cmp) and opened as the active document. The file includes the component name and the number of parts contained in the component. For each part, the pin details are given for each of the graphical representations (Normal and any Alternates).

Tips

  1. The first part in the list is part zero. This part is usually used for multi-part components as a method of declaring the power pins for all individual parts in a single place. Part zero cannot be seen graphically in the Schematic Library Editor, but rather pins are assigned to it in the Component Pin Editor dialog. The dialog is accessed by clicking the  on the Pins tab of the Properties panel (which presents properties for the active component).
  2. The report is generated in the same location as the library document. If the source library is part of a project, the report is added to the Projects panel under the Generated\Text Documents sub-folder. If the source library is open as a free document, the report is added to the Projects panel under the Free Documents\Documentation\Text Documents sub-folder.

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: