Sch_Dlg-ChooseDocumentToPlaceChoose Document to Place_AD
Created: июля 28, 2015 | Updated: июня 16, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
Вы просматриваете версию 15.1. Для самой новой информации, перейдите на страницу Sch_Dlg-ChooseDocumentToPlace((Choose Document to Place))_AD для версии 21
The Choose Document to Place dialog.
Summary
This dialog allows the designer to choose the target schematic document that is to be referenced by a newly-created sheet symbol, when using the Create Sheet Symbol From Sheet or HDL command.
Access
The dialog is accessed from the Schematic Editor in the following ways:
- Using the Design » Create Sheet Symbol From Sheet or HDL command, from the main menus.
- Right-clicking in the design workspace, away from any design objects, and using the Sheet Actions » Create Sheet Symbol From Sheet or HDL command on the context menu.
Options/Controls
The main area of the dialog lists all candidate schematic documents for the project, that can validly be used as the target reference sub-sheet for the new sheet symbol. Each document is listed in terms of its name, and path to the folder in which it resides.
Simply click on an entry to select the required document.
