Sch_Dlg-ChooseDocumentToReferenceChoose Document to Reference_AD

Вы просматриваете версию 18.1. Для самой новой информации, перейдите на страницу Sch_Dlg-ChooseDocumentToReference((Choose Document to Reference))_AD для версии 21
Applies to Altium Designer versions: 18.0 and 18.1

The Choose Document to Reference dialog

The Choose Document to Reference dialog

Summary

This dialog allows you to choose the target schematic document that is to be referenced by the sheet symbol whose properties are currently being defined.

Access

The dialog is accessed from the Properties panel in Sheet Symbol mode by clicking ... to the right of the File Name field in the Source region.

Options/Controls

The main area of the dialog lists all candidate schematic documents for the project that can be used as the target reference sub-sheet for the sheet symbol. Each valid document's name and path to the folder in which it resides is listed.

Click on an entry to select the required document.

The sheet on which the sheet symbol is placed will not be listed. This is because a sheet symbol cannot reference the same sheet on which it is already placed.

 

Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.