PCB_Dlg-PasteSpecialPaste Special_AD

Created: 七月 28, 2015 | Updated: 六月 19, 2017 | Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1

您正在阅读的是 17.1. 版本。关于最新版本，请前往 PCB_Dlg-PasteSpecial((Paste Special))_AD 阅读 22 版本

The Paste Special dialog.

Summary

This dialog allows designers to specify special paste options for an object.

Access

In the PCB Editor, select Edit » Paste Special from the toolbar.

Options/Controls

Paste attributes

Paste on current layer - enable this option to paste objects onto the current layer.
Keep net name - enable this option to keep the original net names for the objects.
Duplicate designator - enable this option to paste a component with the same designator without auto-incrementing.
Add to component class - enable this option to have the pasted component added to the same component class as the source component.

The Duplicate designator and Add to component class options become available for use when the copied source component is available on the clipboard.

Buttons

Paste - Click to paste the object with all specified attributes.
Paste Array - Click to open the Setup Paste Array dialog, where the designer can set up options for array paste. See the Setup Paste Array dialog page for more options.

适合打印版本