Altium NEXUS Documentation

LineOrBorderWidthSelect

Created: August 4, 2017 | Updated: August 1, 2018

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: _Value_=Smallest

Summary

This command is used to change the width of the line (or border) for the selected design object to Smallest, where applicable.

Access

This command is accessed from the Schematic Editor by clicking the  button on the Line or Border Width drop-down () of the Formatting toolbar.

Use

First, ensure that the object whose line width or border width you wish to change is selected in the main design workspace.

After launching the command, the object's line or border width, as applicable, will be set to Smallest and change graphically in the workspace.

Tips

  1. This feature will only be available if applicable to the currently selected object. That is, it has a Width or Border property.
  2. You can select multiple objects to have their Width/Border changed using this feature.


Applied Parameters: _Value_=Small

Summary

This command is used to change the width of the line (or border) for the selected design object to Small, where applicable.

Access

This command is accessed from the Schematic Editor by clicking the  button on the Line or Border Width drop-down () of the Formatting toolbar.

Use

First, ensure that the object whose line width or border width you wish to change is selected in the main design workspace.

After launching the command, the object's line or border width, as applicable, will be set to Small and change graphically in the workspace.

Tips

  1. This feature will only be available if applicable to the currently selected object. That is, it has a Width or Border property.
  2. You can select multiple objects to have their Width/Border changed using this feature.


Applied Parameters: _Value_=Medium

Summary

This command is used to change the width of the line (or border) for the selected design object to Medium, where applicable.

Access

This command is accessed from the Schematic Editor by clicking the  button on the Line or Border Width drop-down () of the Formatting toolbar.

Use

First, ensure that the object whose line width or border width you wish to change is selected in the main design workspace.

After launching the command, the object's line or border width, as applicable, will be set to Medium and change graphically in the workspace.

Tips

  1. This feature will only be available if applicable to the currently selected object. That is, it has a Width or Border property.
  2. You can select multiple objects to have their Width/Border changed using this feature.


Applied Parameters: _Value_=Large

Summary

This command is used to change the width of the line (or border) for the selected design object to Large, where applicable.

Access

This command is accessed from the Schematic Editor by clicking the  button on the Line or Border Width drop-down () of the Formatting toolbar.

Use

First, ensure that the object whose line width or border width you wish to change is selected in the main design workspace.

After launching the command, the object's line or border width, as applicable, will be set to Large and change graphically in the workspace.

Tips

  1. This feature will only be available if applicable to the currently selected object. That is, it has a Width or Border property.
  2. You can select multiple objects to have their Width/Border changed using this feature.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: