Applied Parameters: ContextSensitive=True|ObjectKind=SignalHarness
This command is used to place a Predefined Harness Connector object onto the current document, whose Harness Name is that defined for a port or sheet entry connected to the signal harness object currently under the cusor. A Harness Connector object is an electrical drawing primitive. It is essentially a container to group various signals together to form a Signal Harness including buses and wires. A harness connector is defined by its Harness Name. A predefined harness connector is simply a harness name that has been declared, along with its required harness entries, within a harness definition file (*.Harness).
This command is accessed from the Schematic Editor by right-clicking over the required signal harness object, and choosing the Signal Harness Actions » Place Harness Connector of Type <ConnectedPortorSheetEntryHarnessType> command, from the context menu.
First, ensure that the cursor is positioned over the required signal harness object in the main design workspace (a signal harness that connects to a port or sheet entry).
After launching the command, the harness connector will appear floating on the cursor. Simply position the connector at the required location and click, or press Enter, to effect placement.
Additional actions that can be performed during placement – while the connector is still floating on the cursor – are:
- Press the Tab key to access the Properties panel, from where properties for the harness connector can be changed on-the-fly. Pressing Tab pauses placement, allowing you to interact with the panel (or other area of the software) directly. To resume, click the pause symbol that appears over the workspace, or press Esc.
- Press the Alt key to constrain the direction of movement to the horizontal or vertical axis, depending on the initial direction of movement.
- Press the Spacebar to rotate the connector counterclockwise or Shift+Spacebar for clockwise rotation. Rotation is in steps of 90°.
- Press the X or Y keys to mirror the connector along the X-axis or Y-axis respectively.
- The Harness Name field - located in the Properties section of the Properties panel, when browsing the properties of a selected harness connector - essentially defines the Harness Connector. When a Harness Name is used within your project, the corresponding Harness Definition is referenced.
- Harness Definitions are automatically generated when a Harness Connector (not predefined) is graphically constructed with Harness Entries. When the Harness Connector is modified, the corresponding Harness Definition is updated to reflect the modifications.