Altium NEXUS Documentation


Created: June 17, 2022 | Updated: June 17, 2022
Applies to altium-nexus version: 5
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Schematic Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to remove the active part from the open multi-part component in the current document.


This command can be accessed from the Schematic Library Editor in the following ways:

  • Choose Tools » Remove Part from the main menus.
  • Right-click and choose Tools » Remove Part from the context menu.


First, ensure that the multi-part component from which you want to remove the part is selected in the Design Item ID list in the SCH Library panel (and is therefore the active component in the design window).

Navigate to the specific part of the component that you want to remove. After launching the command, the part will be removed from the component.


  1. You can also remove parts from a multi-part component directly from the SCH Library panel. All constituent parts are listed underneath the component's entry in the panel. Either double-click on the component name or click on the tree expander symbol (to the left of the name) to list all associated parts.
  2. Parts of components that have been removed cannot be restored by using the Undo command.


Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: