Sch_Prop-ParameterСвойства Parameter_AD

Вы просматриваете версию 18.1. Для самой новой информации, перейдите на страницу Свойства Parameter для версии 21
Applies to Altium Designer versions: 18.0 and 18.1
 

Parent page: Parameter

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object.

 The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Parameter object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (accessed from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Parameter object properties are available for editing in the Properties panel when a Parameter is selected in the workspace.

The Parameter default settings in the Preferences dialog and the Parameter mode of the Properties panel           The Parameter default settings in the Preferences dialog and the Parameter mode of the Properties panel

In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as "Properties panel only".

Location (Properties panel only)

  • (X/Y) 
    • X (first field) - the current X (horizontal) coordinate of the reference point of the object, relative to the current workspace origin. Edit to change the X position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 
    • Y (second field) - The current Y (vertical) coordinate of the reference point of the object, relative to the current origin. Edit to change the Y position of the object. The value can be entered in either metric or imperial;  include the units when entering a value whose units are not the current default. 
  • Rotation - use the drop-down to select the rotation. Choices are: 0 Degrees90 Degrees180 Degrees, and 270 Degrees.

Properties

  • Object type (Properties panel only) - displays the type of object (Component, Sheet Symbol, etc.) and parameter type.
  • Name - the name of the parameter. Toggle  to show/hide the name.
  • Value - the value of the parameter. Toggle ​ to show/hide the value.
  • Text Font Settings 
    • Font - use the controls to select the font, font size, font color, and add any desired special characteristics to the font, such as bold, italics, and underlines.
    • Justification - click the arrows to configure the justification of the text.  
Content
Content