WorkspaceManager_Err-MultipleTopLevelDocumentsMultiple Top-Level Documents_AD

現在、バージョン 20.0. をご覧頂いています。最新情報については、バージョン WorkspaceManager_Err-MultipleTopLevelDocuments((Multiple Top-Level Documents))_AD の 21 をご覧ください。
Applies to Altium Designer versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
 

Parent category: Violations Associated with Documents

デフォルトのレポートモード:

概要

This violation occurs in hierarchical designs when two or more schematic sheets are at the top-level of the structure.

通知

If compiler errors and warnings are enabled for display on the schematic (enabled on the Schematic - Compiler page of the Preferences dialog), an offending object will display a colored squiggle beneath it. Hovering over the object will display a pop-up hint that summarizes the violation. A notification is also displayed in the Messages panel in the following format:

Multiple top level documents: <SheetName> has been used

ここで

  • SheetNameは、トップレベルシートとして現在、使用されている回路図ドキュメントの名称です。

推奨する解決法

この問題は、通常、正しいトップシート上のシートシンボルが、意図するサブシートを正しく対象としていないことによって発生します。この問題を解決するには、まず、どの回路図シートが意図するサブシートであるかを判断します。トップレベルの回路図で、シートシンボルが意図するサブシートに対して配置されているかどうかを確認します。

  • シートシンボルが存在しない場合は、手作業で配置するか [Create Sheet Symbol From Sheet] コマンド(メインの [Design] メニューからアクセス)を使用して作成します。
  • If the sheet symbol exists, ensure that it references the sub-sheet. Check the entry in the sheet symbol's File Name field in the Properties section on the General tab of the Properties panel (when the sheet symbol is selected in the workspace). The target document itself is specified in the Source section (on that same tab of the panel) with the source set to Local for a standard sheet symbol.

再コンパイルすると、階層の問題が解決し、[Messages] パネルにエラーが表示されなくなります。

Tip

  • Object hints will only appear provided the Enable Connectivity Insight option is enabled on the System - Design Insight page of the Preferences dialog. Use the controls associated with the Object Hints entry in the Connectivity Insight Options region of the page to determine the launch style for such hints (Mouse Hover and/or Alt+Double Click). 
注記

利用できる機能は、Altium Designer ソフトウェア サブスクリプション のレベルによって異なります。

Content