WorkspaceManager_Err-SheetEntryNotLinkedToChildSheetSheet Entry Not Linked To Child Sheet_AD

現在、バージョン 20.2. をご覧頂いています。最新情報については、バージョン WorkspaceManager_Err-SheetEntryNotLinkedToChildSheet((Sheet Entry Not Linked To Child Sheet))_AD の 21 をご覧ください。
Applies to Altium Designer versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
 

Parent category: Violations Associated with Documents

デフォルトのレポートモード:

概要

This violation occurs when a sheet entry is not matched with a port on the child sheet referenced by the parent sheet symbol. All sheet entries in the parent sheet symbol must be synchronized (matched) to corresponding ports on the child sheet.

通知

If compiler errors and warnings are enabled for display on the schematic (enabled on the Schematic - Compiler page of the Preferences dialog), an offending object will display a colored squiggle beneath it. Hovering over the object will display a pop-up hint that summarizes the violation. A notification is also displayed in the Messages panel in the following format:

Sheet-Entry <SheetEntryName> not matched to Port at <Location>

ここで

  • SheetEntryNameは、親シートシンボルに関連付けられているシートエントリー名です。
  • Locationは、シートエントリーの電気的ホットスポットのX、Y座標です。

推奨する解決法

この問題は、いくつもの理由によって発生します。

  • シートエントリーに対応するポートが存在しない。
  • シートエントリーに対応するポートは存在するが、名前が異なる。
  • シートエントリーに対応するポートは存在するが、I/Oタイプが異なる。

Use the Details region of the Messages panel to cross-probe to the sheet entry in question. Right-click on the parent sheet symbol then choose Sheet Symbol Actions » Synchronize Sheet Entries and Ports from the menu that appears. This will give you access to the Synchronize Ports To Sheet Entries dialog for that sheet symbol.

このダイアログを使用して、問題のシートエントリーを必要なポートと一致させます。ポートが存在しない場合は、このダイアログから直接作成できます。ポートは存在するが、名前と/またはI/Oタイプが異なる場合は、一致の一部として、使用する名前とI/Oタイプをシートエントリーに合わせるかポートに合わせるかを決定します。

Tips

  1. シートエントリー、およびポートは存在するが、名前と/またはI/Oタイプが異なる場合は、ポートがシートエントリーに一致していない旨のエラーメッセージが当該状況に応じて表示されます。シートエントリーとポートを同期することで、いずれのエラーも解消されます。
  2. Object hints will only appear provided the Enable Connectivity Insight option is enabled on the System - Design Insight page of the Preferences dialog. Use the controls associated with the Object Hints entry in the Connectivity Insight Options region of the page to determine the launch style for such hints (Mouse Hover and/or Alt+Double Click). 

 

注記

利用できる機能は、Altium Designer ソフトウェア サブスクリプション のレベルによって異なります。

Content