PCB_Dlg-IncludeSnapPointFormChoose Selectable Points_AD

Вы просматриваете версию 17.1. Для самой новой информации, перейдите на страницу PCB_Dlg-IncludeSnapPointForm((Choose Selectable Points))_AD для версии 22
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0 and 17.1


The Choose Selectable Points dialog.

Summary

This dialog allows the designer to select how a point is chosen on a 3D model, when running various 3D Body placement commands.

Access

This dialog is opened after running a command that requires a point on a 3D model to be selected. Run the command, click on a placed 3D model, then press the Tab key. Any of the following commands can be used to accessed the dialog:

  • Tools » 3D Body Placement » Orient and Place 3D Body
  • Tools » 3D Body Placement » Position 3D Body
  • Tools » 3D Body Placement » Set Body Height
  • Tools » 3D Body Placement » Measure Distances

Options/Controls

Up to two point types can be included:

  •  Include Snap Points - Enable to be able to select and measure from any placed snap points on the 3D model.
  •  Include Vertices - Enable to be able to select and measure from any vertices on the 3D model.
Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.