Altium Designer Documentation

Junctions Conversion

Created: June 8, 2017 | Updated: June 19, 2017
您当前阅读的版本为18.0。 关于最新版本,请参阅: 版本 22 的

The Junctions Conversion dialog
The Junctions Conversion dialog

Summary

This dialog includes controls to change how junctions appear in schematics. 

Access

In the schematic editor, click Tools » Convert » Convert Cross Junctions.

Options/Controls

Scope

  • Sheet Scope - choose one of the following options to determine the scope of the update:
    • Current Document - update the active schematic document only with changes to its current template.
    • Project Documents - update the active schematic document as well as all other schematic documents in the active project with changes to their respective current templates. Schematics that are currently closed will be opened.
    • Open Documents - update the active schematic document as well as all other open schematic documents (regardless of parent project) with changes to their respective current templates.
  • Selection - use the drop-down to choose the desired objects of the scope:

    • All Objects - select all objects in the selected sheet(s) from Sheet Scope.

    • Selected Objects - select only the objects that are selected in the chosen sheet(s) from Sheet Scope.

Options

  • Miter Size - enter a value to define the size of the Miter.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: